Something stops working and the question is always the same: what is wrong, how bad is it, and how soon can somebody fix it. A breaker that will not reset, a room with no power, lights that dim when the refrigerator kicks on, an outlet that feels warm, a panel that hums when the house is quiet. These are the calls we take in Columbus and across Bartholomew County, and the answer starts on the phone before anyone is scheduled. We scope the job when you call, confirm the price, and get the work arranged. We are available any hour of the day, any day of the week, including weekends and holidays.
Columbus is a city with a real mix of housing. There are newer builds with modern panels and there are older properties where the wiring was put in for a different era of electrical load. Businesses, rental owners, and homeowners all run into the same basic problems: circuits that can not carry what is being asked of them, panels that have reached the end of their useful life, and wiring that needs to be brought up to current standards. Whatever the situation, the process is the same. Call, get the job scoped, get the price, and get it done.
Not every power problem is an electrical fault inside the home. Some of what looks like a wiring issue is actually a utility problem, and knowing which side of the meter it sits on determines what happens next. When power is out to the whole property and the panel looks fine, the fault may be at the service entrance or upstream of it. When only part of the house has lost power, the panel and the wiring inside the home are where we start.
We check the panel first. If the breakers are in good shape and the panel is feeding current correctly, the problem is likely with the utility's supply, and the right call is to the utility company. If the fault is inside the home, we trace it from the panel through the affected circuits and identify what needs to be repaired or replaced.
If the fault turns out to be on the utility's side, we tell you that clearly and explain what to report when you call them. We do not leave a customer without a next step. If there is any question about where the boundary sits, we work through it on the call before anyone comes out.
A point-of-use strip handles what is plugged into it. A panel-mounted surge protector handles every circuit in the house from a single installation. The difference matters in a region where severe thunderstorms and the voltage spikes that follow them are a regular part of the year. A whole-home surge protector installs at the breaker panel and intercepts spikes before they reach any outlet, appliance, or piece of equipment in the building. It is a contained job that pairs well with a panel upgrade or a new circuit installation.
Recessed lighting is one of the more practical upgrades a Columbus homeowner can make, and the scope of the job depends on what is already in the ceiling. Where there is attic access and an existing circuit with capacity, the installation is straightforward. Where the ceiling is finished and the circuit is already loaded, we assess what the wiring can carry before anything is opened up. LED fixtures draw significantly less current than older incandescent or fluorescent fittings, which sometimes allows more fixtures on the same circuit. We confirm the load calculation on the call.
A panel where half the breakers are unlabeled or mislabeled is a problem that shows up in older homes and in properties that have changed hands a few times. When a fault develops, an unlabeled panel slows everything down. Panel labeling is a straightforward job: we trace each circuit through the home, confirm what it feeds, and mark the panel accurately. It is also useful before any renovation or addition, so the electrician doing the new work knows exactly what the existing circuits are carrying.
Outdoor lighting covers a range of situations. Security lighting at entry points, motion-sensor fixtures, and landscape runs all require wiring that is rated for exterior use and protected against the conditions it will face. We run new circuits where the existing outdoor wiring is insufficient, install GFCI protection at outdoor receptacles as code requires, and handle the fixture installation from the junction box out. For rental properties and commercial buildings in Columbus, exterior lighting is often part of a broader electrical visit rather than a standalone job.
Calling an electrician doesn't have to be stressful, and the first question on the call is always what the situation is, not when you are available. We take short-notice calls. We work nights, weekends, and holidays because those are the hours when faults do not wait. For a business that has to stay open, or a tenant situation where access needs to be coordinated, we work through the details when the job is scoped.
Rental owners in Columbus often need electrical work handled without being on-site themselves. We confirm the scope and the price on the call, and the visit is arranged with whoever has access to the property. A fault that cannot wait gets moved to the front of the schedule. A planned upgrade or a circuit addition gets booked at a time that works.
We know schedules shift, so we keep booking flexible, and that applies to Columbus calls the same as any other.
The price is confirmed before the work is scheduled. When you call, the job gets scoped on the phone: what the symptom is, what the likely cause is, what the work involves, and what it will cost. That is the number you agree to before anyone comes out.
What can change a quote is what the job turns out to be once it is opened up. A breaker that seems like a simple replacement sometimes points to a wiring fault behind the panel. A lighting circuit that looks straightforward sometimes reveals a run that has to be rerouted. If the scope changes once the work is under way, the cost is explained before anything additional is done. You get straight answers about your panel and wiring, and that includes the price.
There are no figures invented here. The rate is the one confirmed on the call, and it covers what was agreed.
Homes of a certain age were built for a much smaller electrical load than a modern household puts on them. A single circuit that once fed a bedroom now runs a television, a gaming system, a phone charger, and a space heater at the same time. Panels that were sized for that earlier era trip under loads they were never designed to carry. The wiring itself may be fine, but the panel and the circuit layout need to be reassessed.
In some older Columbus properties, the wiring type is the issue rather than just the capacity. Aluminum branch-circuit wiring requires specific attention at every connection point. Knob-and-tube systems, where they still exist, were not built for modern loads and the insulation around them degrades over time. Neither is automatically a reason to rewire the whole house, but both need a proper assessment before any additional load is added to them.
Not every old wire needs to come out. Wiring that is in good condition, properly protected, and not carrying more than it was rated for can often be left in place. The decision depends on what the inspection finds: the condition of the insulation, the type of wiring, the load it is carrying, and whether the existing circuits can support what the home now needs. Where whole-home rewiring is the right answer, we explain why before the work starts. Where a targeted repair or a circuit addition is enough, that is what gets quoted.
An EV charger or a hot tub often means checking the panel first. Adding that kind of load to a home with an older panel and aging wiring requires knowing what the system can actually carry before the circuit is run. Plenty of Columbus jobs start with a look at our page of electrical services.
We cover Columbus and the communities around it in Bartholomew County, including Bethel Village, Walesboro, Petersville, Harrison Lake, and Clifford. Electrical work in these areas follows the same process as any Columbus call: scope the job on the phone, confirm the price, and get it scheduled. Distance within the coverage area does not change how the call is handled.
For rental properties, commercial buildings, and older homes outside the Columbus city limits, the same range of work applies. Panel upgrades, backup generator hookups, code-compliant wiring, outdoor lighting, and circuit installation are all available across the area we serve. If you are in Bartholomew County and need electrical work, the call goes to the same number.
We can assess work that was done without a permit and identify what needs to be corrected to meet current code. Whether that work can be signed off as-is or needs to be redone depends on what was done and how. We scope that on the call and confirm what the correction involves before scheduling.
Older homes in the area tend to have panels that were sized for a much smaller electrical load than a modern household puts on them, along with wiring types that need specific attention when additional load is added. Knob-and-tube systems and aluminum branch-circuit wiring both require a proper assessment before any new circuits or appliances are connected to them. We identify what the existing system can carry before any work is quoted.
We distinguish between faults that need attention now and items that should be addressed soon but are not immediately dangerous. The report reflects that order, and we walk through it with you so you understand which findings are urgent and which can be scheduled at a more convenient time.
Yes. We handle electrical work at rental properties throughout Bartholomew County, including the communities around Columbus. The process is the same as for any other call: the job is scoped on the phone, the price is confirmed, and the visit is arranged with whoever has access to the property.
A workshop with power tools typically needs dedicated circuits sized for the draw of the equipment being used. A table saw, a compressor, or a welder each draws enough current that sharing a circuit with other tools or household loads creates problems. We assess the equipment list and the panel capacity on the call to determine what the workshop needs.
Yes. When you call, the job gets scoped on the phone and you get a straight answer about what the work involves and what it costs. There is no obligation to schedule anything based on that conversation. The goal is that you have the information you need to make the decision.
Temporary outdoor power for an event is a job we can scope on the call. It involves running circuits to the outdoor area, installing weatherproof outlets, and confirming the panel can carry the added load. The approach depends on the load the event requires and the distance from the panel. Call to confirm what your specific setup needs.
In most cases, yes. We work through the details on the call, including which circuits need to be de-energized and for how long, so the scope of the disruption is clear before the visit is scheduled. Work that can be done in stages or outside business hours gets arranged that way when the situation calls for it.
A fault that is getting worse is not one to sit on. We are available around the clock, any day of the week, for Columbus and the surrounding area.
Call (463) 444-6595 for a quote.
The job gets scoped on the call, the price is confirmed before anything is scheduled, and the work gets arranged from there. We handle repairs, panel work, wiring, outdoor lighting, surge protection, and generator hookups across Columbus and Bartholomew County. One call and we are on it.
Also serving: Franklin, Shelbyville, Whiteland, New Whiteland. For every town we reach, see our full list of areas.
We handle the full range of residential and commercial electrical work in Columbus and across Bartholomew County, from a tripped breaker or dead outlet to a panel upgrade, new wiring, or backup generator hookup. The table below breaks down each service, what it covers, and who it fits best.
Call (463) 444-6595 for a quote and we will scope the job on the phone before anything is scheduled.
| Service Type | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrades, Load calculation and panel sizing, Service entrance wiring, Full panel replacement | Older homes adding EV chargers, home offices, or major appliances that exceed current panel capacity | A load calculation is part of every upgrade so the new panel fits what the home actually demands now and going forward. |
| Ceiling Fan Installation | Fan-rated box replacement, New wiring runs where needed, Standard fan swap and upgrade, Switch and remote wiring | Any room adding a ceiling fan for the first time or replacing an older unit | If there is no existing box or wiring in the ceiling, we handle the full run from the switch to the fixture. |
| Older-Home Rewiring | Knob-and-tube system replacement, Aluminum branch-circuit remediation, Partial rewiring for specific areas, Full rewiring for whole-home replacement | Columbus-area homes with aging wiring that cannot safely carry modern electrical loads | Aluminum wiring connections loosen over time and need proper remediation at every device and connection point to reduce the risk of overheating. |
Call (463) 444-6595 and we will walk through what the job involves, confirm the price, and get it on the schedule.
(463) 444-6595