The electrical demands on a house have changed faster than most wiring was built to handle. Homes that once ran a few lights and a refrigerator now carry EV chargers, home offices, whole-house air conditioning, and kitchen appliances that each draw more current than an entire floor used to need. That gap between what the wiring was sized for and what it is being asked to do is where most of the calls we get in Lawrence originate. A panel that trips under normal load, outlets that can't keep up, or a circuit that simply wasn't there when the house was built are all signs that the system needs attention.
We handle that work for Lawrence homeowners, rental property owners, and businesses throughout the city. Whether the job is a single outlet that has stopped working or a full service upgrade to bring the panel in line with what the house now demands, we scope it on the phone before anything is scheduled. We are available any hour, any day, including weekends and holidays.
Call (463) 444-6595 for a quote.
Some electrical faults cannot wait. A breaker that won't reset, an outlet with scorch marks, a burning smell near the panel, or a partial power loss that came on without warning are situations where waiting is not the right answer. We take calls around the clock and can schedule urgent work without waiting for a business-day opening. When you call, the fault gets scoped on the phone so the visit is prepared before anyone arrives.
Work inside an occupied rental unit or a commercial space that has to stay open requires a different kind of coordination. We confirm the scope and the access details on the call, work around the schedule the property needs, and keep disruption to what the job actually requires. If a circuit or panel section has to go offline during the work, that is confirmed in advance so the tenant or business can plan for it. The job gets treated like it matters, because it does.
Rental units and condominiums in Lawrence present their own set of situations. The panel in an apartment may be inside the unit, in a shared utility space, or in a locked room the tenant does not have access to. When the panel is in a common area, the property manager or building owner is the right contact for panel-side work, while the wiring and devices inside the unit are the tenant's side of the call. We help sort out which is which on the phone before scheduling, so the visit covers what it actually needs to cover.
Shared circuits are common in older multi-family buildings, and they create load problems that show up as tripping breakers or dimming lights when multiple units are running at once. Identifying whether the fault is inside one unit or shared across the building changes what the fix involves. We trace the problem from the symptom back to its source before any work starts.
Not every power problem in Lawrence starts inside the home. The utility owns the lines up to the meter, and a fault on their side of the connection needs to go through them. What we can do is help identify where the problem sits.
If the voltage coming into the panel is irregular, or if the service entrance shows signs of damage or deterioration, that points toward the utility side. If the meter and the service entrance are intact but the panel or downstream wiring is the issue, that is our side. We check what we can access, tell you what we find, and confirm whether the next step is a call to the utility or a repair we can schedule. Service-entrance and meter upgrades, where the work is on the property side of the connection, are part of what we handle.
A quote for electrical work in Lawrence is put together based on what the job actually involves. Three things move it in either direction: what the fault turns out to be, what has to be opened up or accessed to reach it, and whether the existing circuit or panel can carry the change without additional work. A straightforward outlet replacement and a partial rewire behind a finished wall are both electrical work, but they involve very different amounts of time and material.
When you call, the job gets scoped on the phone. The price is confirmed before anything is scheduled. If something changes once the work is under way, that conversation happens before the scope expands, not after.
There is no separate estimate appointment for most jobs. The call is where the scoping happens. Ask what the work covers and you get a straight answer. Take a look at the full list of electrical services to see what else is covered.
Call (463) 444-6595 and we will work through what the job involves before you commit to anything.
Battery-powered alarms are easy to install and easy to neglect. Hardwired alarms draw from the home's electrical system and include a battery backup, so they stay active through a power outage. Interconnected hardwired alarms are required by code in most new construction and renovation work: when one sounds, they all sound. If the home has older standalone alarms or no hardwired protection at all, we wire and install a code-compliant system.
Outdoor lighting runs from a simple fixture replacement at the front door to a full landscape lighting circuit with multiple zones. Security lighting and motion-sensor fixtures need a properly wired circuit and a weatherproof installation to hold up over time. We handle the wiring and the mounting, whether the work is a single fixture or a new outdoor circuit that does not yet exist.
A three-way switch controls a single light from two locations: the top and bottom of a stairwell, or both ends of a hallway. Multi-location switching extends that to three or more points. The wiring for these is more involved than a standard switch replacement because the travelers between the switches have to be run correctly for the circuit to behave as expected. We scope the wiring before the job starts.
Ground-fault circuit interrupter outlets are required in kitchens, bathrooms, garages, crawl spaces, and outdoor locations. Arc-fault circuit interrupter protection is required on bedroom circuits in most current code and is increasingly required in other areas of the home. Older Lawrence homes often have neither in the required locations. We add GFCI and AFCI protection where it is missing, either at the outlet or at the breaker depending on what the circuit calls for. Arc-fault and ground-fault breakers at the panel are the right answer when a single breaker needs to cover an entire circuit.
A new appliance, a hot tub, or a workshop with heavy power tools each needs a dedicated circuit sized for the load it draws. Adding a circuit starts with a panel capacity check. If the panel has room, we run the circuit and install the outlet or connection the equipment requires. If the panel is already at capacity, a subpanel installation or a service upgrade may be the right answer before the circuit is added. We confirm which applies on the call.
EV charger circuits follow the same process. A Level 2 charger runs on a 240-volt dedicated circuit, and the panel needs available capacity before the circuit can be run. We handle the panel check, the circuit, and the outlet or hardwired connection.
Rewiring comes up in Lawrence homes where the existing wiring has reached the end of its useful life or was never adequate for the load the house carries now. Aluminum branch-circuit wiring is a specific situation that needs remediation at every device and connection point rather than a simple replacement. Knob-and-tube systems, where the insulation has deteriorated or the circuits have been extended in ways the original installation was not designed for, are candidates for full or partial rewiring depending on the scope. Grounding and bonding are part of any rewiring project, and we confirm what the inspection will expect before the work is closed out.
We take calls from across Lawrence and the surrounding parts of Marion County, including McCordsville, Cumberland, Warren Park, Fishers, and Fortville. Whether the job is at a single-family home, a rental unit, or a commercial property, the process is the same: scope it on the phone, confirm the price, and get it scheduled.
Yes. Every circuit, outlet, or fixture that was part of the job is tested before we leave. If something does not perform correctly after the work is done, we identify and fix it before the visit is closed out. We do not sign off on work that has not been verified.
Yes. We handle commercial electrical repair, panel upgrades, outlet and lighting installation, and wiring work for offices, retail spaces, and rental properties throughout Lawrence and Marion County. The process is the same as for a residential call: the job gets scoped on the phone, the price is confirmed before scheduling, and the work is done to the standard the next inspection expects.
A warm or discolored faceplate usually means the outlet or the wiring behind it is overheating. That can result from a loose connection, an overloaded circuit, or a failing device. It is not something to leave and check on later. Call us and we will get it assessed as quickly as the schedule allows.
Homes built before the 1980s in this part of Marion County sometimes have aluminum branch-circuit wiring or older panel equipment that was not sized for modern loads. Both are manageable, but they need to be addressed correctly rather than patched. Aluminum wiring in particular requires remediation at every connection point, not just a replacement at the device that failed. If you are not sure what type of wiring your home has, an inspection call is the right starting point.
Lights dimming briefly when a large appliance starts is usually a sign that the appliance is drawing a surge of current at startup that the circuit is struggling to absorb. It can be normal with older panels or undersized circuits, but if it is getting worse or happening with appliances that have been running fine for years, it is worth having the panel and the circuit checked.
A shared supply means the main service entrance feeds multiple units, and work on the supply side can affect more than one. We confirm the supply arrangement before scheduling any panel or service work in a multi-unit building and coordinate access with the building contact so the impact on other units is managed.
Start by checking the panel for a tripped breaker. If the breaker is in the correct position and the affected area still has no power, the fault may be on the utility side of the meter. We can help you work through what the symptoms point to on the phone. If the issue turns out to be on the utility's side, we will tell you that directly rather than scheduling a visit that would not solve the problem.
A quote can change if the work uncovers a condition that was not visible during the initial assessment. A hidden wiring fault, a panel that is in worse shape than it appeared, or a structural obstacle that changes the routing are all examples. We stop and explain what was found and what it changes before proceeding, so the decision is yours.
Every job we take on in Lawrence gets completed to the standard the next inspection expects. The work is done, the site is left clean, and you know what was done before we leave.
Call (463) 444-6595 for a quote.
We power your home. We protect your circuits. We earn the call.
Wiring and panel work nearby: Cumberland, Fishers, Carmel, Beech Grove, Greenfield. Everywhere else we go is in our full list of areas.
We handle the full range of residential and commercial electrical work in Lawrence and across Marion County, from a tripped breaker or dead outlet to a panel upgrade, new wiring, or backup generator hookup. The table below breaks down each service, what it covers, and who it fits best.
Call (463) 444-6595 for a quote and we will scope the job on the phone before anything is scheduled.
| Service Type | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrades, Load calculation and panel sizing, Service entrance wiring, Full panel replacement | Older homes adding EV chargers, home offices, or major appliances that exceed current panel capacity | A load calculation is part of every upgrade so the new panel fits what the home actually demands now and going forward. |
| Electrical Repairs & Troubleshooting | Fault tracing from symptom to source, Breaker and wiring checks, GFCI and AFCI outlet repair, Partial power loss diagnosis | Any home or business with flickering lights, dead outlets, or tripping breakers | We explain the fault before the repair begins so you know exactly what failed and why. |
| Lighting Installation | Recessed and LED fixture installation, Under-cabinet and pendant lighting, Outdoor security and motion-sensor lighting, Landscape lighting circuits | Homeowners upgrading interior lighting or adding outdoor security and landscape lighting | LED recessed lighting upgrades improve output and reduce energy draw without a major project. |
Call (463) 444-6595 and we will walk through what the job involves, confirm the price, and get it on the schedule.
(463) 444-6595